Point d'accès Cisco IW3702-2E-E-K9
4948 $
Industriel sans fil Points d'accès Cisco série 3700 (IW3700) Offre des performances et des performances de qualité de pointe dans les environnements industriels et extérieurs à haute densité. Les points d'accès de la série IW3700 sont certifiés pour les environnements industriels et fournissent des transferts à haut débit et d'autres applications gourmandes en bande passante.. Ils prennent également en charge les clients Wi-Fi de nouvelle génération — smartphones, tablettes et savoir Tbukami avec support standard 802.11ac.
Points d'accès Cisco série IW3700 — ce sont les composants d’un réseau sans fil unifié Cisco, ce qui signifie la possibilité d'évoluer jusqu'à 18 000 points d'accès avec une mobilité complète de niveau 3 dans n'importe quelle entreprise industrielle, succursale ou site distant.. Réseau sans fil unifié Cisco — L'architecture la plus évolutive, flexible et fiable du secteur, offrant un accès fiable aux services et applications mobiles, ainsi qu'un faible coût total de possession, une protection des investissements et une intégration facile dans votre réseau filaire existant..
Caractéristiques Points d'accès Cisco AIR IW3700 (IW3702-2E-E-K9):
|
Software |
Cisco Unified Wireless Network Software Release with AireOS Wireless Controllers: ● 8.0.120.0 or later for the Cisco IW3700 Series Access Point Cisco IOS Software Release ● 15.3(3)JA5 or later for the Cisco IW3700 Series Access Point |
|||||
|
Supported wireless LAN controllers |
● Cisco 2500 Series Wireless Controllers, Cisco 3500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller |
|||||
|
802.11ac Wave 1 capabilities |
● 4 x 4 MIMO with 3 spatial streams ● Maximal-Ratio Combining (MRC) ● 802.11ac beamforming ● 20-, 40-, and 80-MHz channels ● PHY data rates up to 1.3 Gbps (80 MHz with 5 GHz) ● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support |
|||||
|
802.11n version 2.0 (and related) capabilities |
● 4 x 4 MIMO with 3 spatial streams ● Maximal-Ratio Combining (MRC) ● 802.11n and 802.11a/g beamforming ● 20- and 40-MHz channels ● PHY data rates up to 450 Mbps (40 MHz with 5 GHz) ● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support |
|||||
|
Available transmit power settings |
2.4 GHz ● 23 dBm (200 mW) ● 20 dBm (100 mW) ● 17 dBm (50 mW) ● 14 dBm (25 mW) ● 11 dBm (12.5 mW) ● 8 dBm (6.25 mW) ● 5 dBm (3.13 mW) ● 2 dBm (1.56 mW) |
5 GHz ● 23 dBm (200 mW) ● 20 dBm (100 mW) ● 17 dBm (50 mW) ● 14 dBm (25 mW) ● 11 dBm (12.5 mW) ● 8 dBm (6.25 mW) ● 5 dBm (3.13 mW) ● 2 dBm (1.56 mW) |
||||
|
Interfaces |
● 10/100/1000BASE-T autosensing (M12 8P female connector with X-coding per IEC 61076-2), PoE In (802.3af), PoE+ In (802.3at) ● 10/100/1000BASE-T autosensing (M12 8P female connector with X-coding per IEC 61076-2), PoE Out (802.3af) ● Management console port (serial with RJ-45 connector) |
|||||
|
Indicators |
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
|||||
|
System memory |
● 512 MB DRAM ● 64 MB flash |
|||||
|
Dimensions (W x L x H) |
● Access point (not including connectors): 11.3 x 8.0 x 2.3 in (28.7 x 20.3 x 5.9 cm) ● Volume: 148 cubic inches (2.4 liters) |
|||||
|
Weight |
● 6.7 lb (3.0 kg) |
|||||
|
Environmental |
● Nonoperating (storage) temperature: -40° to +185°F (-40° to +85°C) ● Nonoperating (storage) altitude test: +25˚C, 15,000 ft. ● Operating temperature: -40° to +158°F (-40° to +70°C) with solar load and still air ● Extended operating temperature (DC powered): -58° to +167°F (-50° to +75°C) without solar loading, still air, and cold start limited to -40°C ● Operating type test: +85°C for 16 hours ● Operating humidity: 0% to 100% (condensing) ● Operating altitude: 15,000 ft. (4,500 m) ● Wind resistance: Up to 160 mph (257 km/h) sustained winds |
|||||
|
Surge |
● Surge protection to ± 2 kV (line-earth) and ± 1 kW (line-line) on DC power input ● Surge protection to ± 4 kV on Ethernet ports |
|||||
|
Input power requirements |
● 9.6 to 60 VDC (M12 4P male connector with A-coding per IEC 61076-2) ● PoE and PoE+ (M12 8P female connector with X-coding per IEC 61076-2) |
|||||
|
Power Draw |
* This is the power required at the Power Sourcing Equipment (PSE) |
|||||
|
Power Input Type |
Environment Condition/Heaters |
Wi-Fi Radio Mode |
PoE Out |
Power Budget (Watts) |
||
|
PoE 802.3af |
> -20°C No heaters active |
3x3:3 on 2.4/5 GHz |
N/A |
15.4 |
||
|
PoE+ 802.3at |
> -20°C No heaters active |
4x4:3 on 2.4/5 GHz |
N/A |
21 |
||
|
PoE+ 802.3at |
-50°C to -20°C Still air 1 heater active |
4x4:3 on 2.4/5 GHz |
N/A |
30 |
||
|
DC In |
> -20°C No heaters active |
4x4:3 on 2.4/5 GHz |
No |
20 |
||
|
DC In |
-50°C to -20°C Still air 1 heater active |
4x4:3 on 2.4/5 GHz |
No |
37 |
||
|
DC In |
-50°C to -20°C Wind cooling 2 heaters active |
4x4:3 on 2.4/5 GHz |
No |
53 |
||
|
DC In |
> -20°C No heaters active |
4x4:3 on 2.4/5 GHz |
Yes |
38 |
||
|
DC In |
-50°C to -20°C Still air 1 heater active |
4x4:3 on 2.4/5 GHz |
Yes |
55 |
||
|
DC In |
-50°C to -20°C Wind cooling 2 heaters active |
4x4:3 on 2.4/5 GHz |
Yes |
71 |
||
| Код товару | 14649 |
|---|---|
| Producteur | Cisco |