Points d'accès Cisco Aironet 1815 Access Point série — Il s'agit d'une solution d'accès sans fil de classe entreprise.
série Cisco Aironet 1815, développé avec compte tenu de la croissance future du trafic, prend en charge la norme 802.11ac Wave 2 и fonctionnalité de classe entreprise Cisco.
Pour chaque région (Reg Domain) Cisco libère son modèle, qui est conforme à la législation actuelle de cette région. Voici les principales régions et leurs appellations:
A
C
E
I
J
K
N
P
S
T
FCC (Etats-Unis)
China
ETSI
Israel
TELEC (Japan)
Korea
North America (à l'exclusion FCC)
Japan2
Singapore
Taiwan
Caractéristiques Points d'accès Cisco AIR 1815W (AIR-AP1815W-E-K9):
Item
Specification
Authentication and security
● Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)
● 802.1X, RADIUS authentication, authorization and accounting (AAA)
● 802.11r
● 802.11i
Software
● Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.4 or later
● Cisco Mobility Express
Maximum clients
● Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac
● 2x2 single-user/multiuser MIMO with two spatial streams
● Maximal ratio combining (MRC)
● 20-, 40-, and 80-MHz channels
● PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic shift diversity (CSD) support
Ethernet ports
● Authentication with 802.1X or MAC filtered
● Dynamic VLAN or per port
● Traffic locally switched or tunneled back to wireless LAN controller
● 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
● Management console port (4-pin connector)
● Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port:
◦ PoE out provides 802.3af (class 0) when access point is powered by 802.3at, or no output when powered by 802.3af
● One passive pass-through port RJ-45 (back to bottom)
Indicators
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors
Dimensions (W x L x H)
● Access point (without mounting bracket): 3.5 x 5.5 x 1.25 in (89 x 140 x 31.5 mm)
Weight
● Access point without mounting bracket or any other accessories: 10 oz (280 g)
Environmental
● Operating
◦ Temperature: 32° to 104°F (0° to 40°C)
◦ Humidity: 10% to 90% (non-condensing)
◦ Max. altitude: 9843 ft (3,000 m) @ 40°C
● Non-operating (storage and transportation)
◦ Temperature: -22° to 158°F (-30° to 70°C)
◦ Humidity: 10% to 90% (non-condensing)
◦ Max. altitude: 15,000 ft (4,500 m) @ 25°C
System
● 1 GB DRAM
● 256 MB flash
● 710 MHz quad-core
Powering options
● 802.3af/at Ethernet switch
● Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)
Power draw
● 8.5W (maximum, without PoE out)
Physical security
● Torx security screw, included with the access point
● Kensington lock slot to lock device to mounting bracket.
Mounting
● Included with the access point: mounting bracket AIR-AP-BRACKET-W3
Accessories
● Mounting bracket: AIR-AP-BRACKET-W3= (available as spare)
● Spacer kit: AIR-AP1815W-KIT= (sold separately), includes spacer and RJ-45 jumper cable
● Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports