Points d'accès Cisco Aironet 1815 Access Point série — Il s'agit d'une solution d'accès sans fil de classe entreprise.
série Cisco Aironet 1815, développé avec compte tenu de la croissance future du trafic, prend en charge la norme 802.11ac Wave 2 и fonctionnalité de classe entreprise Cisco.
Pour chaque région (Reg Domain) Cisco libère son modèle, qui est conforme à la législation actuelle de cette région. Voici les principales régions et leurs appellations:
A
C
E
I
J
K
N
P
S
T
FCC (Etats-Unis)
China
ETSI
Israel
TELEC (Japan)
Korea
North America (à l'exclusion FCC)
Japan2
Singapore
Taiwan
Caractéristiques Points d'accès Cisco AIR 1815M (AIR-AP1815M-E-K9C):
Item
Specification
Authentication and security
● Advanced Encryption Standard (AES) for Wi-Fi Protected Access 2 (WPA2)
● 802.1X, RADIUS authentication, authorization, and accounting (AAA)
● 802.11r
● 802.11i
Software
● Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.4 or later
● Cisco Mobility Express
Maximum clients
● Maximum number of associated wireless clients: 200 per Wi-Fi radio, in total 400 clients per access point
802.11ac
● 2 x 2 single-user/multiuser MIMO with two spatial streams
● Maximal ratio combining (MRC)
● 20-, 40-, and 80-MHz channels
● PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz)
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx)
● 802.11 Dynamic Frequency Selection (DFS)
● Cyclic shift diversity (CSD) support
Ethernet ports
● Authentication with 802.1X or MAC filtered
● Dynamic VLAN or per port
● Traffic locally switched or tunneled back to wireless LAN controller
Note: This varies by regulatory domain. Refer to the product documentation for specific details for each regulatory domain.
Available transmit power settings
2.4 GHz
27 dBm (500 mW)
24 dBm (250 mW)
21 dBm (125 mW)
18 dBm (63 mW)
15 dBm (32 mW)
12 dBm (16 mW)
9 dBm (8 mW)
6 dBm (4 mW)
5 GHz
24 dBm (250 mW)
21 dBm (125 mW)
18 dBm (63 mW)
15 dBm (32 mW)
12 dBm (16 mW)
9 dBm (8 mW)
6 dBm (4 mW)
3 dBm (2 mW)
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for specific details.
Integrated antennas
● 2.4 GHz, gain 2 dBi
● 5 GHz, gain 4 dBi
Interfaces
● 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE)
● Management console port (RJ-45)
Indicators
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors
Dimensions (W x L x H)
● Access point (without mounting bracket): 6 x 6 x 1.3 in. (150.8 x 150.8 x 33mm)
Weight
● Access point without mounting bracket or any other accessories: 1.01 lb (460 grams)
Environmental
● Operating
◦ Temperature: 32° to 104°F (0° to 40°C)
◦ Humidity: 10% to 90% (noncondensing)
◦ Max. altitude: 9,843 ft (3,000m) @ 40’C
● Nonoperating (storage and transportation)
◦ Temperature: –22° to 158°F (–30° to 70°C)
◦ Humidity: 10% to 90% (noncondensing)
◦ Max. altitude: 15,000 ft (4,500m) @ 25’C
System
● 1-GB DRAM
● 256-MB flash memory
● 710-MHz quad-core
Input power requirements
● 802.3af or 802.3at power
Powering options
● 802.3af/at Ethernet switch
● Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)
Power draw
● 12.5W (maximum, on PoE)
Physical security
● Torx security screw, included with the access point
Mounting
● Included with the access point: mounting bracket AIR-AP-BRACKET-8
Accessories
● Mounting bracket: AIR-AP-BRACKET-8= (available as spare)
● Physical security kit: AIR-SEC-50= (sold separately), with 50 pcs. security screws used to secure the access point onto wall-mounting bracket, 50 pcs. RJ-45 caps and 2 pcs. unlock keys used to block physical access to Ethernet ports