Point d'accès Aruba (HPE) JW247A

SKU
JW247A
988,52 €
EAN: 21890
État: Nouveau
Stock: Disponible sur commande
Lead time: 25-35 jours
GPL price:

1997 $

HPE Aruba Instant IAP-228 (RW) FIPS/TAA - Radio access point 

Durable 228 les points d'accès sans fil intérieurs offrent des performances Gigabit Wi-Fi pour les appareils mobiles 802.11ac dans des environnements intérieurs difficiles tels que les entrepôts et les stades.

Sa conception industrielle unique prend en charge une plage de température plus large pour les environnements dépourvus de chauffage et de refroidissement.. 228 a également six connecteurs RP-SMA pour antennes externes à gain élevé dans les grands espaces publics.

Avec une vitesse de transfert de données maximale 1,3 Gbit / Avec dans le périmètre 5 GHz и 600 Mbit / Avec dans le périmètre 2,4 GHz 228 Cela fonctionne trois fois plus vite que les points d'accès 802.11n et offre des performances similaires à une connexion filaire. De plus, pour améliorer la simplicité et la sécurité du réseau, la segmentation dynamique applique automatiquement les politiques d'accès au niveau des appareils en temps réel sur les réseaux filaires et sans fil d'Aruba..

Caractéristiques techniques du point d'accès Aruba (HPE) JW247A:

AP-228 SPECIFICATIONS

·         2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3x3 MIMO and three combined, diplexed external antenna connectors.

WIRELESS RADIO SPECIFICATIONS

·         AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n

·         In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate.

·         Software-configurable dual radio supports 5 GHz and 2.4 GHz

·         3x3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate

·         Supported frequency bands (country-specific restrictions apply):

·         2.4000 GHz to 2.4835 GHz

·         5.150 to 5.250 GHz

·         5.250 to 5.350 GHz

·         5.470 to 5.725 GHz

·         5.725 to 5.850 GHz

·         Available channels: Dependent on configured regulatory domain

·         Dynamic frequency selection (DFS) optimizes the use of available RF spectrum

·         Supported radio technologies:

·         802.11b: Direct-sequence spread-spectrum (DSSS)

·         802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

·         802.11n/ac: 3x3 MIMO with up to three spatial streams

·         Supported modulation types:

·         802.11b: BPSK, QPSK, CCK

·         802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM

·         802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

·         Transmit power: Configurable in increments of 0.5 dBm

·         Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):

·         2.4-GHz band: +28 dBm (23 dBm per chain)

·         5-GHz band: +28 dBm (23 dBm per chain)

·         Advanced Cellular Coexistence (ACC) feature to effectively deal with interference from cellular systems

·         Maximum ratio combining (MRC) for improved receiver performance

·         Cyclic delay diversity (CDD) for improved downlink RF performance

·         Short guard interval for 20-MHz, 40-MHz and 80-MHz channels

·         Space-time block coding (STBC) for increased range and improved reception

·         Low-density parity check (LDPC) for high-efficiency error correction and increased throughput

·         Transmit beam-forming (TxBF) for increased reliability in signal delivery

·         Supported data rates (Mbps):

·         802.11b: 1, 2, 5.5, 11

·         802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

·         802.11n: 6.5 to 450 (MCS0 to MCS23)

·         802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3)

·         802.11n high-throughput (HT) support: HT 20/40

·         802.11ac very high throughput (VHT) support: VHT 20/40/80

·         802.11n/ac packet aggregation: A-MPDU, A-MSDU

POWER

·         Worst-case power consumption from the AP: 23W

·         Power sources sold separately

·         Power over Ethernet (PoE+): 802.3at-compliant

OTHER INTERFACES

·         Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45)

·         Auto-sensing link speed and MDI/MDX

·         Load balancing support to achieve platform throughput greater than 1 Gbps

·         PoE-PD: 802.3at PoE+

·         Serial console interface (Micro USB)

MOUNTING

·         Optional mounting kits

·         AP-220-MNT-W1 is directly compatible

·         270 Series outdoor AP mounts (AP-270-MNT-V1, AP-270-MNT-V2, AP-270-MNT-H1, AP-270-MNT-H2) are compatible when the AP-270-MNT-ADP adapter is utilized

MECHANICAL

·         Dimensions/weight (unit, excluding mount accessories):

·         222 mm (L) x 150 mm (W) x 75 mm (H), 8.5” (L) x 6” (W) x 2.5” (H)

·         1.225 kg/2.700 lbs

ENVIRONMENTAL

·         Operating:

·         Temperature: -40° C to +60° C (-40° F to +140° F)

·         Humidity: 5% to 95% non-condensing

·         Storage and transportation:

·         Temperature: -40° C to +70° C (-40° F to +158° F)

·         Operating Altitude: 3,000 m

ANTENNAS

·         Six RP-SMA connectors for external antennas

REGULATORY

·         FCC/Industry of Canada

·         CE Marked

·         R&TTE Directive 1995/5/EC

·         Low Voltage Directive 72/23/EEC

·         EN 300 328

·         EN 301 489

·         EN 301 893

·         UL/IEC/EN 60950

·         EN 60601-1-1 and EN 60601-1-2

·         For more country-specific regulatory information and approvals, please see your Aruba representative.

REGULATORY MODEL NUMBERS

·         AP-228 and IAP-228: APIN0228

CERTIFICATIONS

·         CB Scheme Safety, cTUVus

·         UL2043 plenum rating

·         Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac

WARRANTY

·         Aruba limited lifetime warranty

MINIMUM SOFTWARE VERSION

·         ArubaOS 6.4.3.0

·         Aruba Instant 4.2.0

 

 

Код товару 21890
Producteur Aruba