Commutateur Cisco IE-5000-12S12P-10G

Type d'appareil

Switch - 28 ports - géré

Type de coquille

Montage sur rail DIN 1U

Sous-type

Gigabit Ethernet

Ports

4 x 1 Gigabit / 10 Gigabit SFP+ + 12 x Fast Ethernet/Gigabit SFP + 12 x 10/100/1000 (PoE+)

Puissance à travers Ethernet (PoE)

PoE+

Performance

Forwarding bandwidth: 64 Gbps Switching bandwidth: 128 Gbps Forwarding rate: 95.238 Mpps

capacité

RADIUS clients 4 IGMP groups: 1000 VLANs supported: 1005 NAT translations: 256

Taille du tableau MAC-adresses

16 mille enregistrements

Protocole de routage

OSPF, BGP-4, IS-IS, RIP-2, EIGRP, IGMPv2, HSRP, IGMP, PIM-SM, PIM-DM, IGMPv3, EIGRP for IPv6, OSPF for IPv6, static IPv4 routing, policy-based routing (PBR), RIPng, Bidirectional Forwarding Detection (BFD)

Protocole de télécommande

SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, HTTP, TFTP, SSH, CLI, SCP

Algorithme de cryptage

FIPS 140-2

Méthode d'authentification

MODBUS

Les fonctions

Layer 3 switching, layer 2 switching, NAT support, ARP support, IGMP snooping, Syslog support, Broadcast Storm Control, IPv6 support, full duplex mode, Multicast Storm Control, Unicast Storm Control, Dying Gasp support, DHCP snooping, Quality of Service (QoS), Digital Optical Monitoring (DOM) support, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), Dynamic ARP Inspection (DAI), Bidirectional Forwarding Detection (BFD), Uni-Directional Link Detection (UDLD), fanless, LLDP support, Port Security, Remote Switch Port Analyzer (RSPAN), Management Information Base (MIB), static routing, 802.1x authentication, SNMP support, MACsec support, IGMP filtering, Oven-Controlled Quartz Oscillator (OCXO), PROFINET v2, EtherNet/IP CIP Messaging, IP source guard, Flex Link support, Resilient Ethernet Protocol (REP), SmartPort technology, Parallel Redundancy Protocol (PRP), TrustSec support, CIP Sync (IEEE 1588), Network Timing Protocol (NTP), IGMP querier, VLAN Double Tagging (Q-in-Q), Voice VLAN, Private VLAN, Guest VLAN, STP BPDU Guard

Conformité

IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ah, IEEE 802.1ag, IEEE 802.1ae, IEEE 802.11n, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.11ac, IEEE 1588v2, IEEE 1613

Mémoire

1 GB

Mémoire flash

128 Mb

Appareils embarqués

SD card reader

Interfaces

4 x 10GBase-X SFP+ uplink 12 x 1000Base-X SFP 12 x 1000Base-T RJ-45 PoE+ 1 x mini-USB 1 x console RJ-45 1 x antenna input 1 x ToD 1 x alarm RJ-45

Emplacements d'extension

1 (total) / 0 (free) x SD Memory Card

Dispositif d'alimentation

Alimentation interne

Quantité installée

0 (installed) / 2 (max)

Power Redundancy Scheme

1+1

Consommation électrique Fonctionnement

90 W>

Included Accessories

1 GB SD card

MTBF

390,190 heures

Compliant Standards

ISPR 22 Class A, CISPR 24, EN55024, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, ICES-003 Class A, EN 61000-4-5, EN 61000-6-2, EN 61000-4-11, RoHS, EN 61000-4-8, UL 60950-1, IEC 60950-1, EN 60950-1, EN 61000-6-4, IEC 60068-2-30, IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6, UL 508, IEC 60529 IP30, CSA 22.2 No. 142, EN 61131-2, IEC 60068-2-64, EN 61000-4-9, EN 61000-4-29, EN50155, IEC 60068-2-14, EN 50121-4, VCCI Class A, KN22, KN24, China RoHS, EN 50121-3-2, EN 61326, CISPR 11 class A, EN 61000-4-18, IEC 61850-3, IEC 60068-2-3, EN 61373, ISO 9223, EN 55022 Class A, FCC CFR47 Part 15 A, CNS 13438 Class A, AS/NZS CISPR 24, IEC 60079, NOM-019-SCFI, IEEE 1588, IEEE 1613 Class 2, EN 60068-2-52, EN 60068-2-60