Commutateur Cisco DS-C9216A-K9

Performance

Port speed: 1/2-Gbps autosensing, optionally configurable

Buffer credits: up to 255 per port

Ports per chassis: 16 fixed configuration. Up to 64 Fibre Channel ports, up to eight 1-Gbps Ethernet ports when configured with optional module

Ports per rack: up to 896 when configured with optional module

PortChannel: up to 16 ports

Software Compatibility

Cisco MDS SAN-OS Release 1.3(2) or later

Protocols

Fibre Channel standards

• FC-PH, Revision 4.3 (ANSI/INCITS 230-1994)
• FC-PH, Amendment 1 (ANSI/INCITS 230-1994/AM1-1996)
• FC-PH, Amendment 2 (ANSI/INCITS 230-1994/AM2-1999)
• FC-PH-2, Revision 7.4 (ANSI/INCITS 297-1997)
• FC-PH-3, Revision 9.4 (ANSI/INCITS 303-1998)
• FC-PI, Revision 13 (ANSI/INCITS 352-2002)
• FC-PI-2, Revision 10 (ANSI/INCITS 404-2006)
• FC-FS, Revision 1.9 (ANSI/INCITS 373-2003)
• FC-FS-2, Revision 0.91
• FC-LS, Revision 1.2
• FC-AL, Revision 4.5 (ANSI/INCITS 272-1996)
• FC-AL-2, Revision 7.0 (ANSI/INCITS 332-1999)
• FC-AL-2, Amendment 1 (ANSI/INCITS 332-1999/AM1-2003)
• FC-AL-2, Amendment 2 (ANSI/INCITS 332-1999/AM2-2006)
• FC-SW-2, Revision 5.3 (ANSI/INCITS 355-2001)
• FC-SW-3, Revision 6.6 (ANSI/INCITS 384-2004)
• FC-SW-4, Revision 7.5 (ANSI/INCITS 418-2006)
• FC-GS-3, Revision 7.01 (ANSI/INCITS 348-2001)
• FC-GS-4, Revision 7.91 (ANSI/INCITS 387-2004)
• FC-GS-5, Revision 8.2
• FC-BB, Revision 4.7 (ANSI/INCITS 342-2001)
• FC-BB-2, Revision 6.0 (ANSI/INCITS 372-2003)
• FC-BB-3, Revision 6.8 (ANSI/INCITS 414-2006)
• FCP, Revision 12 (ANSI/INCITS 269-1996)
• FCP-2, Revision 8 (ANSI/INCITS 350-2003)
• FCP-3, Revision 4 (ANSI/INCITS 416-2006)
• FC-SB-2, Revision 2.1 (ANSI/INCITS 349-2001)
• FC-SB-3, Revision 1.6 (ANSI/INCITS 374-2003)
• FC-VI, Revision 1.84 (ANSI/INCITS 357-2002)
• FC-FLA, Revision 2.7 (INCITS TR-20-1998)
• FC-PLDA, Revision 2.1 (INCITS TR-19-1998)
• FC-Tape, Revision 1.17 (INCITS TR-24-1999)
• FC-MI, Revision 1.92 (INCITS TR-30-2002)
• FC-MI-2, Revision 2.6 (INCITS TR-39-2005)
• FC-SP, Revision 1.6
• FC-DA, Revision 3.1 (INCITS TR-36-2004)
• FAIS, Revision 0.7

IP over Fibre Channel (RFC 2625)

IPv6, IPv4 and ARP over FC (RFC 4338)

Extensive IETF-standards based TCP/IP, SNMPv3, and remote monitoring (RMON) MIBs

Class of Service: Class 2, Class 3, Class F

Fibre Channel standard port types: E, F, FL, B

Fibre Channel enhanced port types: SD, ST, TE

Cards, Ports, Slots

Base: 16 fixed autosensing 1/2-Gbps Fibre Channel ports

Expansion: 1 empty expansion slot

Fabric Services

Name server

Internet Storage Name Server (iSNS)

Registered State Change Notification (RSCN)

Login services

Fabric Configuration Server (FCS)

Private loop

Public loop

Translative loop

Broadcast

In-order delivery

Advanced Functionality

VSAN

Inter-VSAN Routing

PortChannel with Multipath Load Balancing

QoS-flow-based, zone-based

Fibre Channel Congestion Control

Diagnostics and Troubleshooting Tools

POST diagnostics

Online diagnostics

Internal port loopbacks

SPAN and Remote SPAN

Fibre Channel Traceroute

Fibre Channel Ping

Fibre Channel Debug

Cisco Fabric Analyzer

Syslog

Online system health

Port-level statistics

Real-Time Protocol Debug

Network Security

VSANs

ACLs

Per-VSAN role-based access control

Fibre Channel Zoning

• N_Port WWN
• N_Port FC-ID
• Fx_Port WWN
• Fx_Port WWN and interface index
• Fx_Port domain ID and interface index
• Fx_Port domain ID and port number
• LUN
• Read-only
• Broadcast

FC-SP

• DH-CHAP switch-switch authentication
• DH-CHAP host-switch authentication

Port Security and Fabric Binding

Management access

• SSHv2 implementing AES
• SNMPv3 implementing AES
• SFTP

FICON

FC-SB-3 compliant

Cascaded FICON fabrics

Intermix of FICON and Fibre Channel FCP traffic

UP management interface

Serviceability

Configuration file management

Call Home

Power management LEDs

Port beaconing

System LED

SNMP traps for alerts

Network boot

Reliability and Availability

Hot-swappable, 1+1 redundant power supplies

Hot-swappable fan tray with integrated temperature and power management

Hot-swappable SFP optics

Hot-swappable switching module

Passive backplane

Stateful process restart

Any module, any port configuration for PortChannels

Fabric-based multipathing

Per-VSAN fabric services

Port tracking

Virtual Routing Redundancy Protocol (VRRP) for management

Online diagnostics

Network Management

Access methods

• Out-of-band 10/100 Ethernet port
• RS-232 serial console port
• In-band IP over Fibre Channel
• DB-9 COM port
• In-band FICON CUP over Fibre Channel

Access protocols

• CLI-using console and Ethernet ports
• SNMPv3-using Ethernet port and in-band IP over Fibre Channel access
• Storage Networking Industry Association (SNIA) Storage Management Initiative Specification (SMI-S)
• FICON CUP

Distributed Device Alias service

Network security

• Per-VSAN role-based access control using RADIUS-based and TACACS+-based authentication, authorization, and accounting (AAA) functions
• SFTP
• SSHv2 implementing AES
• SNMPv3 implementing AES

Management applications

• Cisco MDS 9000 Family CLI
• Cisco Fabric Manager
• Cisco Device Manager
• CiscoWorks Resource Manager Essentials (RME) and Device Fault Manager (DFM)

Programming Interfaces

Scriptable CLI

Fabric Manager GUI

Device Manager GUI

Environmental

Temperature, ambient operating: 32 to 104°F (0 to 40°C)

Temperature, ambient nonoperating and storage: 40 to 158°F (40 to 75°C)

Relative humidity, ambient (noncondensing) operating: 10 to 90%

Relative humidity, ambient (noncondensing) nonoperating and storage: 10 to 95%

Altitude, operating: -197 to 6500 ft (60 to 2000 m)

Physical Dimensions

Dimensions (H x W x D): 5.25 x 17.32 x 22.66 in. (13.34 x 43.99 x 57.56 cm), 3 RU

• All units rack mountable in standard 19 in. EIA rack

Weight

• Fully configured chassis with optional switching module: 70 lb (32 kg)

Power and Cooling

Power supply (845WAC)

• AC input characteristics

-          100 to 240 VAC (10% range)

-          50 to 60 Hz (nominal)

Airflow

• 200 linear feet per minute (lfm) through system fan assembly
• Cisco recommends that you maintain a minimum air space of 2.5 in. (6.4 cm) between walls and chassis air vents and a minimum horizontal separation of 6 in. (15.2 cm) between two chassis to prevent overheating.

Approvals and Compliance

Safety compliance

• CE Marking
• UL 60950
• CAN/CSA-C22.2 No. 60950
• EN 60950
• IEC 60950
• TS 001
• AS/NZS 3260
• IEC60825
• EN60825
• 21 CFR 1040

EMC compliance

• FCC Part 15 (CFR 47) Class A
• ICES-003 Class A
• EN 55022 Class A
• CISPR 22 Class A
• AS/NZS 3548 Class A
• VCCI Class A
• EN 55024
• EN 50082-1
• EN 61000-6-1
• EN 61000-3-2
• EN 61000-3-3