Commutateurs Aruba (Hewlett Packard Enterprise) proposer de choisir la solution optimale en termes de fonctionnalité et de prix pour une tâche de toute envergure. La gamme comprend les modèles L2 et L3, des commutateurs modulaires, des appareils à configuration fixe. Toutes les fonctionnalités sont disponibles immédiatement, pas besoin d'acheter des licences supplémentaires.
Commutateurs de noyau représentée châssis modulaire Séries 8400 et 5400, caractérisées par des performances élevées, une tolérance aux pannes, une large gamme de protocoles réseau pris en charge et la possibilité d'installer des modules de service.
Commutateurs d'accès Représenté par des modèles avec un large ensemble de protocoles de réseau pris en charge, support de support. La gamme est principalement représentée par des appareils pour 24 et 48 ports 10/100/1000 GigEthernet avec possibilité d'accompagnement PoE, ou des commutateurs optiques avec SFP ports, ainsi que des interfaces de liaison montante SFP+ ou QSFP+. La gamme FlexNetwork offre une prise en charge améliorée des protocoles de routage dynamique, IPv6 и MPLS.
Hewlett Packard Enterprise présente aux clients une gamme complète de produits pour les réseaux de campus sur le système d'exploitation ArubaOS. S'allume Système d'exploitation ArubaOS facile à déployer et à utiliser. Il est possible d'intégrer des outils de gestion et de sécurité modernes Aruba ClearPass Policy Manager, Aruba AirWave et service cloud Aruba Central, optimisé pour les réseaux définis par logiciel (SDN) technologique OpenFlow. Les principales fonctionnalités du nouveau système d'exploitation incluent le travail en mode tunneling, le profilage des appareils, la prise en charge SmartRate, ZTP (Zero Touch Provisioning) et support des systèmes de contrôle (Aruba Activate, Central и AirWave), différenciation de l'accès des utilisateurs par rôles à l'aide Aruba CPPM (ClearPass Policy Manager), Access OSPF pour les commutateurs d'accès, etc..
Caractéristiques techniques du commutateur Aruba (HPE) J9822A:
|
PHYSICAL INTERFACES
|
- 5406R zl2 Switch (J9821A):
- 6 open module slots
- Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination
- 5412R zl2 Switch (J9822A):
- 12 open module slots
- Supports a maximum of 288 autosensing 10/100/1000 ports or 288 SFP ports or 96 SFP+ ports or 96 HPE Smart Rate Multi-Gigabit or 24 40GbE ports, or a combination
- 5406R-44G-PoE+/2SFP+ (No PSU) v2 zl2 Switch (J9823A):
- 44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 2 open 10GbE SFP+ transceiver slots
- 4 open module slots
- Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination
- 5412R-92G-PoE+/2SFP+ (No PSU) v2 zl2 Switch (J9825A):
- 92 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 2 open 10GbE SFP+ transceiver slots
- 8 open module slots
- Supports a maximum of 288 autosensing 10/100/1000 ports or 288 SFP ports or 96 SFP+ ports or 96 HPE Smart Rate Multi-Gigabit or 24 40GbE ports, or a combination
- 5406R-44G-PoE+/4SFP (No PSU) v2 zl2 Switch (J9824A):
- 44 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 4 open mini-GBIC (SFP) slots
- 4 open module slots
- Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination
- 5412R-92G-PoE+/4SFP (No PSU) v2 zl2 Switch (J9826A):
- 92 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 4 open mini-GBIC (SFP) slots
- 8 open module slots
- Supports a maximum of 288 autosensing 10/100/1000 ports or 288 SFP ports or 96 SFP+ ports or 96 HPE Smart Rate Multi-Gigabit or 24 40GbE ports, or a combination
- 5406R-8XGT/8SFP+ (No PSU) v2 zl2 Switch (J9868A):
- 8 RJ-45 10GbE ports (IEEE 802.3an-2006 Type 10GBASE-T)
- 8 open 10GbE SFP+ transceiver slots
- 4 open module slots
- Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination
- 5412R 92GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch (JL001A):
- 92 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 4 open 10GbE SFP+ transceiver slots
- 8 open module slots
- Supports a maximum of 288 autosensing 10/100/1000 ports or 288 SFP ports or 96 SFP+ ports or 96 HPE Smart Rate Multi-Gigabit or 24 40GbE ports, or a combination
- 5406R 8-port 1/2.5/5/10GBASE-T PoE+ and 8-port SFP+ (No PSU) v3 zl2 Switch (JL002A):
- 8 RJ-45 HPE Smart Rate Multi-Gigabit ports
- 8 open 10GbE SFP+ transceiver slots
- 4 open module slots
- Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination
- 5406R 44GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch (JL003A):
- 44 RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 4 open 10GbE SFP+ transceiver slots
- 4 open module slots
- Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination
- 5406R 16-port SFP+ (No PSU) v3 zl2 Switch (JL095A):
- 16 open 10GbE SFP+ transceiver slots
- 4 open module slots
- Supports a maximum of 144 autosensing 10/100/1000 ports or 144 SFP ports or 48 SFP+ ports or 48 HPE Smart Rate Multi-Gigabit or 12 40GbE ports, or a combination
|
|
INCLUDED ACCESSORIES
|
- 5406R zl2 Switch (J9821A):
- 1 Aruba 5400R zl2 Management Module (J9827A)
- 1 Aruba 5406R zl2 Switch Fan Tray (J9831A)
- 1 fan tray slot
- 5412R zl2 Switch (J9822A):
- 1 Aruba 5400R zl2 Management Module (J9827A)
- 1 Aruba 5412R zl2 Switch Fan Tray (J9832A)
- 1 fan tray slot
- 5406R-44G-PoE+/2SFP+ (No PSU) v2 zl2 Switch (J9823A):
- 1 Aruba 5400R zl2 Management Module (J9827A)
- 1 Aruba 5406R zl2 Switch Fan Tray (J9831A)
- 1 Aruba 24-port Gig-T PoE+ v2 zl Module (J9534A)
- 1 Aruba 20-port Gig-T PoE+ / 2-port 10GbE SFP+ v2 zl Module (J9536A)
- 1 fan tray slot
- 5412R-92G-PoE+/2SFP+ (No PSU) v2 zl2 Switch (J9825A):
- 1 Aruba 5400R zl2 Management Module (J9827A)
- 1 Aruba 5412R zl2 Switch Fan Tray (J9832A)
- 3 Aruba 24-port Gig-T PoE+ v2 zl Module (J9534A)
- 1 Aruba 20-port Gig-T PoE+ / 2-port 10GbE SFP+ v2 zl Module (J9536A)
- 1 fan tray slot
- 5406R-44G-PoE+/4SFP (No PSU) v2 zl2 Switch (J9824A):
- 1 Aruba 5400R zl2 Management Module (J9827A)
- 1 Aruba 5406R zl2 Switch Fan Tray (J9831A)
- 1 Aruba 24-port Gig-T PoE+ v2 zl Module (J9534A)
- 1 Aruba 20-port Gig-T PoE+ / 4-port SFP v2 zl Module (J9535A)
- 1 fan tray slot
- 5412R-92G-PoE+/4SFP (No PSU) v2 zl2 Switch (J9826A):
- 1 Aruba 5400R zl2 Management Module (J9827A)
- 1 Aruba 5412R zl2 Switch Fan Tray (J9832A)
- 3 Aruba 24-port Gig-T PoE+ v2 zl Module (J9534A)
- 1 Aruba 20-port Gig-T PoE+ / 4-port SFP v2 zl Module (J9535A)
- 1 fan tray slot
- 5406R-8XGT/8SFP+ (No PSU) v2 zl2 Switch (J9868A):
- 1 Aruba 5400R zl2 Management Module (J9827A)
- 1 Aruba 5406R zl2 Switch Fan Tray (J9831A)
- 1 Aruba 8-port 10GbE SFP+ v2 zl Module (J9538A)
- 1 Aruba 8-port 10GBASE-T v2 zl Module (J9546A)
- 1 fan tray slot
- 5412R 92GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch (JL001A):
- 1 Aruba 5400R zl2 Management Module (J9827A)
- 1 Aruba 5412R zl2 Switch Fan Tray (J9832A)
- 3 Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module (J9986A)
- 1 Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port
- 1G/10GbE SFP+ MACsec v3 zl2 Module (J9990A)
- 1 fan tray slot
- 5406R 8-port 1/2.5/5/10GBASE-T PoE+ and 8-port SFP+ (No PSU) v3 zl2 Switch (JL002A):
- 1 Aruba 5400R zl2 Management Module (J9827A)
- 1 Aruba 5406R zl2 Switch Fan Tray (J9831A)
- 1 Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module (J9993A)
- 1 Aruba 8-port 1/2.5/5/10GBASE-T PoE+ MACsec v3 zl2 Module (J9995A)
- 1 fan tray slot
- 5406R 44GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch (JL003A):
- 1 Aruba 5400R zl2 Management Module (J9827A)
- 1 Aruba 5406R zl2 Switch Fan Tray (J9831A)
- 1 Aruba 24-port 10/100/1000BASE-T PoE+ MACsec v3 zl2 Module (J9986A)
- 1 Aruba 20-port 10/100/1000BASE-T PoE+ / 4-port 1G/10GbE SFP+ MACsec v3 zl2 Module (J9990A)
- 1 fan tray slot
- 5406R 16-port SFP+ (No PSU) v3 zl2 Switch (JL095A):
- 1 Aruba 5400R zl2 Management Module (J9827A)
- 1 Aruba 5406R zl2 Switch Fan Tray (J9831A)
- 2 Aruba 8-port 1G/10GbE SFP+ MACsec v3 zl2 Module (J9993A)
- 1 fan tray slot
|
|
POWER SUPPLIES
|
- 5406R Switches:
- 2 power supply slots
- 1 minimum power supply required (ordered separately)
- 5412R Switches:
- 4 power supply slots
- 2 minimum power supply required (ordered separately)
-
|
|
MEMORY AND PROCESSOR
|
- Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal
- ARM11 @ 450 MHz; Packet buffer size: 18 Mb internal
- Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal
- ARM11 @ 550 MHz; Packet buffer size: 18 Mb internal
- Dual ARM Coretex A9 @ 1 GHz; Packet buffer size: 13.5 MB Internal
- Freescale P2020 dual core @ 1.2 GHz, 16 MB flash, 1 GB SD Card, 4 GB DDR3 SODIMM
|
|
PERFORMANCE
|
- 1000 Mb Latency: < 2.8 µs (FIFO 64-byte packets)
- 10 Gbps Latency: < 1.8 µs (FIFO 64-byte packets)
- 40 Gbps Latency: < 1.5 µs (FIFO 64-byte packets)
- Routing table size: 10000 entries (IPv4), 5000 entries (IPv6)
- MAC address table size: 64000 entries
- Throughput:
- 5406R Switches: up to 571.4 Mpps
- 5412R Switches: up to 1142.8 Mpps
- Routing/Switching capacity:
- 5406R Switches: 960 Gbps
- 5412R Switches: 1920 Gbps
- Switch fabric speed:
- 5406R Switches: 1015 Gbps
- 5412R Switches: 2030 Gbps
- IPv6 Ready Certified:
- 5406R zl2 Switch (J9821A)
- 5412R zl2 Switch (J9822A)
- 5406R-44G-PoE+/2SFP+ (No PSU) v2 zl2 Switch (J9823A)
- 5412R-92G-PoE+/2SFP+ (No PSU) v2 zl2 Switch (J9825A)
- 5406R-44G-PoE+/4SFP (No PSU) v2 zl2 Switch (J9824A)
- 5412R-92G-PoE+/4SFP (No PSU) v2 zl2 Switch (J9826A)
- 5406R-8XGT/8SFP+ (No PSU) v2 zl2 Switch (J9868A)
|
|
DIMENSIONS
|
- Physical Dimensions:
- 5406R Switches:
(H) 17.53 cm x (W) 44.45 cm x (D) 45.09 cm (6.9” x 17.5” x 17.75”) (4U height)
- 5412R Switches:
(H) 30.73 cm x (W) 44.45 cm x (D) 45.09 cm (12.1” x 17.5” x 17.75”) (7U height)
- Weight:
- 5406R zl2 Switch (J9821A): 11.11 kg (24.5 lb)
- 5412R zl2 Switch (J9822A): 17.28 kg (38.1 lb)
- 5406R-44G-PoE+/2SFP+ (No PSU) v2 zl2 Switch (J9823A): 12.75 kg (28.11 lb)
- 5412R-92G-PoE+/2SFP+ (No PSU) v2 zl2 Switch (J9825A): 20.5 kg (45.19 lb)
- 5406R-44G-PoE+/4SFP (No PSU) v2 zl2 Switch (J9824A): 11.88 kg (26.19 lb)
- 5412R-92G-PoE+/4SFP (No PSU) v2 zl2 Switch (J9826A): 20.59 kg (45.4 lb)
- 5406R-8XGT/8SFP+ (No PSU) v2 zl2 Switch (J9868A): 12.75 kg (28.11 lb)
- 5412R 92GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch (JL001A): 20.5 kg (45.19 lb)
- 5406R 8-port 1/2.5/5/10GBASE-T PoE+ and 8-port SFP+ (No PSU) v3 zl2 Switch (JL002A): 12.75 kg (28.11 lb)
- 5406R 44GT PoE+ and 4-port SFP+ (No PSU) v3 zl2 Switch (JL003A): 12.75 kg (28.11 lb)
- 5406R 16-port SFP+ (No PSU) v3 zl2 Switch (JL095A): 12.75 kg (28.11 lb)
|
|
MOUNTING AND ENCLOSURE
|
- Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included); Horizontal surface mounting only
|
|
ENVIRONMENTAL
|
- Operating temperature range: 0°C to 45°C (32°F to 113°F); 0°C to 40°C with J8177C transceiver installed, 0°C to 35°C with FIPS Opacity Shield installed
- Operating relative humidity: 15% to 95% @ 45°C (113°F), noncondensing
- Storage temperature range: -40°C to 70°C (-40°F to 158°F)
- Storage humidity: 15% to 90% @ 65°C (149°F), non-condensing
- Operating altitude: 10,000 feet
- Acoustic:
- 5406R Switches:
Power: 44 dB, Pressure: 31.7 dB ISO 7779, ISO 9296
- 5412R Switches:
Power: 49 dB, Pressure: 35.7 dB ISO 7779, ISO 9296
|
|
ELECTRICAL CHARACTERISTICS
|
- Frequency: 50/60 Hz
- 80plus.org Certification: Gold
- Description:
Does not come with power supply. Two (5406R Switches) or four (5412R Switches) open power supply slots are available; three different power supplies are available. See power supply products for additional specifications.15% to 95% @ 45°C (113°F), noncondensing
- Voltage: 110 - 127 / 200 - 240 VAC, rated (depending on power supply chosen)
- Maximum heat dissipation:
- 5406R Switches:
2450 BTU/hr (2584.75 kJ/hr), (max. non-PoE);
3700 BTU/hr (3903 kJ/hr) (max. using PoE)
- 5412R Switches:
4900 BTU/hr (5169.5 kJ/hr), (max. non-PoE);
7400 BTU/hr (7807 kJ/hr) (max. using PoE)
- Idle power:
- 5406R Switches: 215 W
- 5412R Switches: 312 W
- Notes:
Idle power is the actual power consumption of the device with no ports connected.
Heat dissipation does not include heat dissipated by the PoE-powered devices themselves.
For 5412R Switches only: When more than four power cords are installed in a 5412R zl2 switch chassis, additional installation requirements are needed. Refer to the Aruba 5400R zl2 Switches Quick Setup Guide and Safety/Regulatory Information manual for details.
|
|
SAFETY CERTIFICATIONS
|
- CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950
|
|
EMISSIONS
|
- FCC part 15 Class A; EN 55022/CISPR 22 Class A
|
|
IMMUNITY
|
- EN: EN 55024, CISPR 24
- ESD: IEC 61000-4-2; 4 kV CD, 8 kV AD; HP ENV. 765.002
- Radiated: IEC 61000-4-3; 3 V/m
- EFT/Burst: IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
- Surge: IEC 61000-4-5; 1 kV/2 kV AC, 1kV signal, 0.5 kV DC
- Conducted: IEC 61000-4-6; 3 Vrms
- Power frequency magnetic field: IEC 61000-4-8; 1 A/m, 50 or 60 Hz
- Voltage dips and interruptions:
IEC 61000-4-11; >95% reduction, 0.5 period; 30% reduction, 25 periods
- Harmonics: EN 61000-3-2, IEC 61000-3-2
- Flicker: EN 61000-3-3, IEC 61000-3-3
|
|
MANAGEMENT AND MONITORING
|
- Command line interface
- Graphical user interface (Web browser)
- AirWave network platform
- IMC - Intelligent Management Center
- Configuration menu
- Out-of-band management (RJ-45 Ethernet)
- SNMP manager
- Out-of-band management (serial RS-232c or micro usb)
|
|
NOTES
|
- Supported 1G SFP transceivers are revision "B" or later (product number ends with the letter "B" or later; For example, J9142B, J8177C).
|
