Commutateur HPE FlexFabric JL836A

HPE FlexFabric 5944 series (JL836A)

I/O ports and slots

48 x 1/10GBASE-T ports

6 x QSFP28 100GbE ports

Additional ports and slots

1 x console port

1 x mini USB port

1 x USB port

2 x out-of-band management ports (1 x SFP GbE port and one copper port)

Power supplies

2 power supply slots

1 minimum power supply required (ordered separately)

Fan tray

5 fan tray slots

5 hot-swappable fans, fan speed adjustable with reversible airflow.

Note: The customer must order fan trays, as they are not included with the switch. The system should not be operated with less than five fan trays for more than 24 hours. The system should not be operated without a fan tray for more than two minutes. The system should not be operated outside of the temperature range of 32°F (0°C) to 113°F (45°C). Failure to comply with these operating requirements may void the product warranty.

Physical characteristics

Dimensions

18.11 in. (w) x 17.32 in. (d) x 1.73 in. (h) (46 cm x 44 cm x 4.4 cm) (1U height)

Weight

 22.05 lb (< 10 kg)

Memory and processor

4 GB flash; packet buffer size: 32 MB, 8 GB SDRAM

Mounting and enclosure

Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included)

Performance

Latency

< 1 µs (64-byte packets)

Throughput

1001.7 Mpps

Routing/switching capacity

2.16 Tbps

Routing table size

324K entries (IPv4), 162K entries (IPv6)

MAC address table size

288K entries (max.)

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative humidity

10% to 95%, noncondensing

Acoustic

Low-speed fan: 67 dB, high-speed fan: 71 dB

Electrical characteristics

Frequency

50/60 Hz

Maximum heat dissipation

887 BTU/hr (935.79 kJ/hr)

Voltage

100 - 240 VAC, rated

DC voltage

–40 VDC to –60 VDC rated

Maximum power rating

233W

Idle power

102W

Notes:

• Idle power is the actual power consumption of the device with no ports connected.
• Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.

Safety

UL 60950-1, CAN/CSA-C22.2 No. 60950-1, IEC 60950-1, EN 60950-1, AS/NZS 60950.1, FDA 21 CFR Subchapter J

Emissions

FCC Part 15 (CFR 47) Class A, ICES-003 Class A, VCCI Class A, CISPR 32 Class A, EN 55032 Class A, AS/NZS CISPR 32 Class A, EN 61000-3-2, EN 61000-3-3, ETSI EN 300 386

Immunity

CISPR 24, EN 55024, ETSI EN 300 386

Management

IHPE IMC; CLI; out-of-band management; SNMP manager; Telnet; FTP

Note: The customer must install a minimum of one power supply, as the device does not come with one. The customer must install five fan kits, as the device does not come with one.